Child pages
  • Meeting Minutes from Joint Techs 2-Feb-09 in College Station
Skip to end of metadata
Go to start of metadata

Meeting Minutes from Joint Techs 2-Feb-09


Carla Hunt, MCNC (Chair)
Tom Throckmorton, MCNC
Greg Henkle
John ?
Eric Boyd, Internet2
Jennifer Schopf
Brian Tierney, ESnet
Ken Lindahl, UC Berkeley
Russ Hobby, Internet2
Someone from APAN
Grant Miller
Azher Mughai, Cal Tech
Mike Van Norman, UCLA
Sandor Rozsa, CERN
Matt Zekauskus, Internet2
Rich Carlson, Internet2
Jeff Boote, Internet2
Aaron Brown, Internet2 (scribe)
Jason Zurawski, Internet2
Chris Robb, Internet2
Emily Eisbruch, Internet2


Before getting into the presentations, Carla discussed modifying the working
group structure. Originally, we had split into a group of task forces that were
each tasked with looking into best-common practices. However, it was decided
that it would be better to have the group work on all of the topics than to
break up into the task forces. She also asked whether meetings should happen on
a monthly or biweekly basis, but no consensus was reached.

Measurement Lab:
Richard Carlson gave a presentation about measurement lab which is a consortium
of parties interested in monitoring commodity networks. The model is more like
IETF where it's a group of individuals, instead of a corporate project.
Measurement Lab started six months ago at a workshop in CA. The topic of the
workshop was the Network Neutrality issue. The idea that came from it was that
if consumers were given accurate information about how an ISP is shaping their
traffic, they will make better decisions in their ISP selection. The problem
statement that was developed for this group shares significant overlap with
problems encountered in R+E networks. The biggest issue is that diagnosing
performance problems in these environments is difficult. The problem could be
host configuration, application choice, or infrastructure anywhere in the
network between the end hosts. As to application choice, Rich gave the example
of SCP which has internal buffers that limit its performance even if the host
and the network are properly configured and working.

As Rich pointed out, there are solutions to these problems, but it's difficult
to get them out to researchers, let alone getting them out to broadband and
commodity users. The difficulty does not stop there. Even if the user knows of
a tools existence, some of the tools are difficult to use and can require
specialized expertise to understand the results. If Measurement Lab waited
until the tools were usable by the average person, it would be years off before
they'd be able to make anything available. The idea was to make some tools
available, and work to improve them over time. Meanwhile, if users are testing,
the system saves the test results, so the tests may be useful, if not
immediately for the user. Joe asked if that data was anonymized. Rich said that
it wasn't, but that a user had to click a start on a page that makes it
apparent that their IP will be made available.

The initial implementation plan is to deploy three servers, Dell 2950s, at 12 of
Google's POPs. These machines will have a gigabit connection to the outside
world. The tools deployed are NDT, NPAD and Glastnost, a Bit-Torrent Degrader
Detector. Currently, there are three servers deployed at one POP, Mountain
View, CA. The next one to come online will be in Dallas with the rest coming
online later. All of the POPs are in the US except one which is in the EU.

The hope is to bring various developers on-board. They'd like to bring on tool
developers who can provide new tools and improve the existing ones to make it
easy for end users to use, and provide more in-depth information about the
network. They'd also like analysis engine developers so that they can provide
analyzers for the data being collected so that this information can be better
used. If anyone is interested in helping the project, they can click the "Get
Involved" link and the consortium will get back to them on how to proceed.

Tom Throckmorton asked which virtual machine was being used on the machines.
Rich said that they were using Planetlab software which uses VServer. The folks
at Princeton are maintaining the machines. They can create "slices" on the
machines, and then give Rich a login. Carla asked if these slices have the
tools on them. Rich said that it starts as a blank linux machine with web100,
and then he and Matt Matthis make sure all the packages are installed. They are
working on scripts to make it easy to duplicate the tools on each machine, and
said that having RPMs for the tools would help. Matt Zekauskus asked whether
there was one slice per machine. Rich said that each physical node has three
slices, each running their own server, and sharing the GigE link. Matt was
worried that the servers might conflict and produce the bad measurement
performance numbers seen on Planet Lab. Rich said that to keep that from being
the case, they were limiting the number of tests, and even if that did occur,
NDT and NPAD can tell if the server is the bottleneck, and flag the data

John asked what the plan was for expanding the resources. Rich said that there
were two ways to go about it. First, Google has agreed to put up 36 machines in
12 POPs where Google already has a presence. These machines will have a 1
Gigabit Ethernet interface to the outside. The other option is to have other
groups donate resources. The Measurement Lab folks will make available a set of
requirements on machines and network connectivity, and, if the donated machines
meet those requirements and the institution is okay with Measurement Lab
running those machines, Measurement Lab will bring them online.

Tom Throckmorton asked about the traffic graph Rich showed, and what the latent
interest was, and what the scalability options were. Rich said the graphs were
made with MRTG on the switch feeding the cluster. The missing pieces on the
graph were where the servers crashed. After restarting, its taking two minutes
to fill up the NDT queues. He noticed that people were becoming frustrated and
leaving because of how long the queue was. Since these slots weren't reaped, it
became a self-perpetuating cycle where a user would get queued, leave, and
cause future users to be further back. So there are things they can do in the
software itself. Also there are other options that they may use to load
balance. They may also start running multiple tests simultaneously since most
users will likely be running broadband, and the servers are running GigE.

Joe asked whether there were usage limits, or if he could setup crontab to
check his connection to twelve places on the Internet every 5 minutes. Rich said
he could, but he'd be competing with a large number of other users, which
creates a natural limit. Rich hadn't been thinking about making this available,
but there have been some requests to allow a policy based limits for NDT.
Though, whether these limits get enabled would need to be discussed by the
entire Measurement Lab group. Jeff said that the plan was to make some of the
NDT tests available in BWCTL, which would let one use the BWCTL policy limits
to limit users.

Matt asked whether or not a campus would be able to use Measurement Lab to test
their commodity links. Rich said that the servers are just machine available on
the public Internet so it shouldn't be an issue.

Eric asked if a CIO would be able to say "i'd like a Measurement Lab on my
campus, for the campus". Rich said that the tools are all available, and could
be stood up. The easiest way is the Performance Node ISO, but a suite of tools
might be provided to easily allow standing up a custom Measurement Lab node.

Eric asked what the plan was to make the data available using perfSONAR. Rich
said that they were going to work with the perfSONAR community to develop the
right plans. When there are the mechanisms available to store the generated
data in an MA, they'll be able to make that data available.

Carla asked whether they'd had any insights behind the choice of tools. Rich
said that that the tools select were what the researchers promoting Measurement
Lab decided should be on there. Jeff asked if there was a process for getting
new tools on there. Rich said that its available on the webpage under Getting
Involved for Reseachers. What they were looking to avoid was twelve tools that
measured throughput. He thought OWAMP might be a good candidate since there's
no way to measure one-way latency. He said the community decides which tools
are on there, so an argument needs to be made as to why it's useful. It would
also depend on how well supported the tool is and how easily it is for a
commodity end user to use it. Since Internet2 is supporting OWAMP, and there's
a Java applet for it, it might be a reasonable tool to include.

Carla asked how the tools were being registered in the Lookup Service. Rich
said that he was using a script written by Aaron Brown to register them. The
script would periodically poll the service to see if it was running, and
refresh the LS registration. Aaron said that he has an RPM, and that the
software might be made available during the next formal release of the
perfSONAR-PS software. Jeff said that they were still looking at the best way
to do the registration, whether to have a daemon register on behalf of the
service or having the service register itself. Rich pointed out an issue with
the current NPAD/NDT registration where the web frontend is being registered,
but not the test frontend, which makes it difficult to write automated tools.

Multi-Vendor 10 Gigabit Testing:

Matt Zekauskus and Tom Throkmorton talked about some testing that they've been
doing for the last year and a half with some folks in EU. They've been testing
how well 1G and higher speed circuits work between differing vendor hardware
over long distance. They've been testing an Alcatel in England, an HDXc and an
OME in MANLAN, and a CoreDirector in New York.

For the 1G testing, using Smartbits hardware, they saw loss at various packet
sizes, though not the smallest nor the biggest. The cause was a Ciena GFP
processing issue which has been fixed.

For the 10G testing, they attached PCs with 10G Myricom cards to the
CoreDirector and the Alcatel. When doing this testing, they saw highly
asymmetric bandwidth. The cause was that Ciena didn't support PAUSE frames,
which is an Ethernet flow control feature. Ciena will be adding support this
feature which should mitigate these issues.

Greg asked if this meant that there's not been much 10GigE interoperability
testing. Matt said that there wasn't much testing being done. Most of the
testing between networks has been single vendor equipment.

Measurement Update:

Jeff gave an update of what they've been working on, and what their priorities
are. They've released some software recently. The perfSONAR-PS Lookup Service
has been deployed at a number of locations. BWCTL and OWAMP saw updated
releases recently. perfSONAR-BUOY had an release for the MDM appliance, but
they're working on making some nicer packaging for a wider release. In general,
the future plan is to increase the usability, performance and stability of the
current tools.

The plan for the Performance Node is to do one more release of the
Knoppix-based Toolkit with some feature updates and update kernel to support
more hardware. The release after that will be using a Fedora Core based LiveCD.
The reason for the change is to make it easier to share the development work,
making it easier for community involvement. The other plan is to make it easier
to support working with a group of nodes. Currently, the administrative GUIs
for the Performance Node are for a single node, but since people are going to
want to deploy several hosts, the plan is to make it easy to do that.

Another focus will be on GUIs for the data already out there. Currently, the
focus has been on getting the middleware working and deployed, and the GUIs
have reflected that focus. Now that there are enough deployments and data, they
are going to start writing GUIs for end users.

DCN integration is important for Internet2. The current DCN software suite
supports a Notification Broker so that interested parties can be informed when
events are occurring on the hardware. The plan is to have the measurement
software listen to these events, and monitor the circuits when they come up.
Once that is working, they are going to provide an analysis GUI to show this

There was a discussion about getting end sites using the tools, and how the
Performance Node might fit into that. There could be an appliance, where
individuals buy hardware containing the Performance Node which they can plug
in. Jeff said this wouldn't make sense for MCNC who are already deploying the
tools, but it might make sense for other groups who don't have time to deploy
their own. Tom commented that that described their k-12/higher education
customers. Some will be able to setup the tools on their own, and others will
need to be walked through completely.

Dan asked what Jeff meant by "appliance"? Jeff said it'd be something they
build and possibly manage. This is the model the EU folks went, and it seems
useful to certain folks. The question is what people want?

Tom said that MCNC was providing the whole spectrum, 1. source code, 2.
packages, 3. a VMWare image, 4. an ISO.

Dan said that he's had difficulty getting stuff out to the campus edges. NIH
had a serious problem a year ago, and said they were going to put in
measurement gear, but they haven't done anything. If they could order something
and drop it on their edge, they'd do that. Dan figured the appliance being
administered by an outside organization would probably be a non-starter for
them. Jeff said that people put remotely controlled video conferencing devices
in their networks regularly. Tom said that the big difference is that the
vendor is willing to bear liability for the device.

John said that something like an Ethernet Termination Device might be a
reasonable compromise. It's a box that sits at the edge of a carrier network.
It doesn't look like a server, though someone from Internet2 might have access
to it, but it doesn't get you deep into campus. Jeff thought that having boxes
at the demarcation points might be good enough. Dan said he'd kicked around the idea
of deploying something like that at the edges for customers' networks so that
it would be easier to figure out whose fault an issue is.

There seemed to be a consensus that an appliance would be good as it'd give
them something they could point their customers at. The only big issue is
support. Jeff was wary of becoming another Arbor Networks. This, however, is an
ongoing conversation.

  • No labels