Authentication

Default authentication

Out of the box, grouper-ws uses container authentication (non-rampart). The web.xml protects all services and expects the users to be in the role "grouper_user". For tomcat, in the tomcat-users.xml, just have entries like this, and you are all set:

<role rolename="grouper_user"/>
  <user username="jota" password="whatever" roles="grouper_user"/>
  <user username="jobr" password="whatever" roles="grouper_user"/>
  <user username="eldo" password="whatever" roles="grouper_user"/>

Note that users to the web service need to be Subjects, and you can configure the default source in the grouper-ws.properties especially if you have subjectId overlap in various sources.

Note the default authentication in grouper-ws is http-basic, so for this and other reasons make sure your deployments of grouper-ws are protected with SSL.

Note that, for some container technologies, container authentication can be externalized in various ways. A common deployment configuration is to externalize tomcat authentication to Apache 2.2+ using the AJP protocol. This permits several popular authentication technologies to be used in conjunction with grouper-ws.

If you do not want to use the servlet container simple auth (even if you front with apache), you need to remove the security settings at the bottom of the web.xml

HTTP basic with kerberos

Grouper-ws comes with an option to authenticate REST or SOAP with HTTP basic auth, but using the user/pass to authenticate to a kerberos kdc. This exists so that kerberos can be used with REST (for SOAP, ws-security would be more secure), and as an example of how to customize the authentication. You should use SSL if you use this authentication. This defeats the purpose of kerberos since it transmits the password over the wire, and it only authenticates to the kdc and not an SSL service, so it might be possible for someone to spoof the kdc. To use this, make the following settings in the grouper-ws.properties (obviously you need to configure the kerberos settings to fit your institution):

# to provide custom authentication (instead of the default httpServletRequest.getUserPrincipal()
# for non-Rampart authentication.  Class must implement the interface:
# edu.internet2.middleware.grouper.ws.security.WsCustomAuthentication
# class must be fully qualified.  e.g. edu.school.whatever.MyAuthenticator
# blank means use default: edu.internet2.middleware.grouper.ws.security.WsGrouperDefaultAuthentication
ws.security.non-rampart.authentication.class = edu.internet2.middleware.grouper.ws.security.WsGrouperKerberosAuthentication

################# KERBEROS settings, only needed if doing kerberos simple auth ################
# realm, whatever your realm is, e.g. SCHOOL.EDU
kerberos.realm = SCHOOL.EDU
# address of your kdc, e.g. kdc.school.edu
kerberos.kdc.address = kdc.school.edu

Custom authentication plugin

If you want custom authentication (e.g. pass in a token, and decode it), then implement the interface edu.internet2.middleware.grouper.ws.security.WsCustomAuthentication and configure your fully qualified classname in the grouper-ws.properties. The default is an implementation of this interface as an example: edu.internet2.middleware.grouper.ws.security.WsGrouperDefaultAuthentication, which just gets the user from the container: httpServletRequest.getUserPrincipal().getName()

Rampart

Rampart is Jakarta's WS-Security implementation. We have vanilla Rampart authentication working with grouper-ws (thanks to Sanjay Vivek). Unfortunately it doesnt work out of the box since it seems Rampart and basic auth cannot work together in the web app. If you want to run basic auth and rampart at the same time, you should deploy two separate web apps.

Note the URL for rampart in grouper-ws is the same, it will look like this: /grouper-ws/services/GrouperService

Also, for Rampart, you need custom logic to authenticate users. To use rampart, configure the grouper-ws.properties entry: ws.security.rampart.authentication.class. An example is: edu.internet2.middleware.grouper.ws.security.GrouperWssecSample. Until you configure that, clients will get a 404 http status code. This assumes you are using WSPasswordCallback, if not, just provide your own class directly to the services.xml file (and grouper-ws requires you have an implementation of the interface anyway which wont be executed).

You need to tell grouper that wssec is enabled in the web.xml servlet param (uncomment):

<servlet>
        <servlet-name>AxisServlet</servlet-name>
        <display-name>Apache-Axis Servlet</display-name>
        <servlet-class>edu.internet2.middleware.grouper.ws.GrouperServiceAxisServlet</servlet-class>
        <load-on-startup>1</load-on-startup>
    <!-- hint that this is the wssec servlet -->
    <init-param>
      <param-name>wssec</param-name>
      <param-value>true</param-value>
    </init-param>
    </servlet>

Also you need to comment out the container auth in web.xml:

<!--  security-constraint>
        <web-resource-collection>
            <web-resource-name>Web services</web-resource-name>
            <url-pattern>/services/*</url-pattern>
        </web-resource-collection>
        <auth-constraint>
            <role-name>grouper_user</role-name>
        </auth-constraint>
    </security-constraint -->

Then you need to enable the correct .aar file.

If you are using a binary grouper-ws.war, just rename the following two files
- /WEB-INF/services/GrouperService.aar to /WEB-INF/services/GrouperService.aar.ondeck
- /WEB-INF/services/GrouperServiceWssec.aar.ondeck to /WEB-INF/services/GrouperServiceWssec.aar
If you are building, just set the param in the build.properties: webapp.authentication.use.rampart
Here is a sample client

HTTP basic authentication (use)

In the web.xml for the grouper-ws project, protect all services:

<security-constraint>
		<web-resource-collection>
			<web-resource-name>Web services</web-resource-name>
			<url-pattern>/services/*</url-pattern>
		</web-resource-collection>
		<auth-constraint>
			<!-- NOTE:  This role is not present in the default users file -->
			<role-name>grouper_user</role-name>
		</auth-constraint>
	</security-constraint>

	<!-- Define the Login Configuration for this Application -->
	<login-config>
		<auth-method>BASIC</auth-method>
		<realm-name>Grouper Application</realm-name>
	</login-config>

	<!-- Security roles referenced by this web application -->
	<security-role>
		<description>
			The role that is required to log in to the Manager
			Application
		</description>
		<role-name>grouper_user</role-name>
	</security-role>
</web-app>

Now send the user and pass in the web service client.
Here is an example with Axis generated clients:

GrouperServiceStub stub = new GrouperServiceStub(
                "http://localhost:8090/grouper-ws/services/GrouperService");
        Options options = stub._getServiceClient().getOptions();
        HttpTransportProperties.Authenticator auth = new HttpTransportProperties.Authenticator();
        auth.setUsername("user");
        auth.setPassword("pass");

        options.setProperty(HTTPConstants.AUTHENTICATE, auth);

Here is an example with a manual HttpClient:

HttpClient httpClient = new HttpClient();
        GetMethod getMethod = new GetMethod(
                "http://localhost:8091/grouper-ws/services/GrouperService/addMemberSimple?groupName=aStem:aGroup&subjectId=10021368&actAsSubjectId=GrouperSystem");

        httpClient.getParams().setAuthenticationPreemptive(true);
        Credentials defaultcreds = new UsernamePasswordCredentials("user", "pass");
        httpClient.getState().setCredentials(new AuthScope("localhost", 8091), defaultcreds);

        httpClient.executeMethod(getMethod);

ActAs configuration

To enable web service users to act as another user (proxy), enable the setting in the grouper-ws grouper.properties

# Web service users who are in the following group can use the actAs field to act as someone else
ws.act.as.group = aStem:aGroup

If you specify a group name in there, you can pass in the actAs field if you connect to the web service as a user who is in the ws.act.as.group group. Here is an example with the axis generated client.

//set the act as id
        WsSubjectLookup actAsSubject = WsSubjectLookup.class.newInstance();
        actAsSubject.setSubjectId("GrouperSystem");
        addMember.setActAsSubjectLookup(actAsSubject);

There are advanced settings, you can specify multiple groups in the grouper-ws.properties, and you can even limit who the users can act as (in a specific group).

Page tree